CyberDyer Figure 8 Descender can be used as a descend in the same way as the standard figure 8.
Bent-ear Figure 8 works as a much more versatile rappel device for SRT.
By wrapping the rope around its ear, it can help people hang in mid altitudes.
It can increase the friction and slow down the descending speed.
Thick body largely decreases the abrasion or wear of rope to a minimum level.
The principle slot is large enough to double or triple your single rope to increase frictions for slow descent.
Used for rocking climbing, tree climbing, fire rescue, expand, mountaineering, caving, engineering protection, high level working, aerial silk.
Rescue 8 with bent ear is also widely used in Aerial Dance, especially aerial silk to make a super safe anchor.
Material: 7075 Aircraft-grade Aluminum Alloy
Features: Durable, Lightweight, Portable
Length: 17CM / 6.7in
Width: 17CM / 6.7in
A Width: 7.1CM / 2.8in
B Width: 5.5CM / 2.15in
Closed Strength: 8800lbs / 50KN
Diameter: 1.5CM / 0.6in
Hole Size: 3.9CM / 1.55in
Net weight: 282g
For the diameter of rope: 8mm – 13mm/0.31″ – 0.51″ (Approx.)
1 x CyberDyer 50KN Figure 8 Descender Belay Device
01 Connect the descender to the load bearing ring on the safety harness
02 Run the rope through small and big rings
03 Turn the descender and link it to the small ring
04 Check if the installation and locking system
05 Double loop the rope around the descender
06 Let the rope through the big ring and rig as shown
07 Undo the rigging
08 Descend steadily as shown
Please do more practice with CyberDyer Figure 8 Descender in lower altitudes before going to the higher altitudes.
Please perform the safety checks no matter how many times you’ve rappelled.
Item Weight : 9.95 Ounces Date First Available : June 26, 2020 Manufacturer : CyberDyer ASIN : B08BXZWQLC
There are no reviews yet.